Home Contact us Service CN

Hotline

0519-86966111 / 15861136007

Products

Home/Products

Product Center

(Catalyst) Forming Machine+Low Temperature belt drier+High Temperature Belt Roaster Production Line

Overview：Summary after the catalyst filter material is shaped (short strip with adjustable diameter and length) by a molding machine (hydraulic extruder), it is evenly spread on a low-temperature belt drier mesh belt (with adjustable paving thickness). The low-temperature belt machine pre-dries the material by the heat provided by steam heating or electric heating, and the drying time is adjustable. The dry material falls into a high-temperature belt roast furnace through a conveyor or a height differenc

Detailed

Waste salt recycling rotary kiln

Overview：Working principle: The continuous rotary atmosphere furnace works in a similar way to the continuous rotary roaster (rotary kiln). Because the materials to be treated need explosion protection and oxidation protection or other media are required to participate in the reaction and impurity removal, the atmospheric media require nitrogen, argon and hydrogen chloride, so the rotary atmosphere furnace needs to adopt a special sealing form to monitor the oxygen content in real time.

Detailed

Sludge thermal desorption rotary kiln

Overview：Working principle: The continuous rotary atmosphere furnace works in a similar way to the continuous rotary roaster (rotary kiln). Because the materials to be treated need explosion protection and oxidation protection or other media are required to participate in the reaction and impurity removal, the atmospheric media require nitrogen, argon and hydrogen chloride, so the rotary atmosphere furnace needs to adopt a special sealing form to monitor the oxygen content in real time.

Detailed

Sludge dryer-blade dryer, disc dryer

Overview：Classification of sludge dryers Sludge dryers are equipped with mixing blades in the equipment: wedge-blade dryers (two or four shafts); Disc type-disc dryer (single shaft). Product Description: Wet materials are fully contacted with the hot surface of the heating carrier under the agitation of blades, so as to achieve the purpose of drying. The structural form is generally horizontal. Sludge dryers are divided into hot air type and conduction type.

Detailed

PTFE oven

Overview：This paper mainly explains that PTFE oven is composed of box, door, steam heat exchanger, electric heater, drying car, drying plate, circulating fan, dehumidifying fan and electrical control. The box is of frame structure, the inner cavity is fully welded, there is no dead angle, and it is easy to clean;

Detailed

Special flash dryer for PVDF

Overview：This paper mainly explains that PVDF rotary flash dryer is composed of air filter, screw feeder, steam heat exchanger, drying host, secondary dryer, bag filter and control system. Three-stage air filter to ensure that the intake air reaches ten thousand purification standards; Unique feeder structure, especially suitable for PVDF quantitative feeding, and also solves the phenomenon of PVDF bridging; An efficient steam heat exchanger not only has high heat exchange efficiency, but also has a temp

Detailed