The maintenance cycle of drying equipment can be changed according to the type of equipment and the use environment. Generally speaking, in order to ensure the normal operation and prolong the service life of the equipment, the following routine maintenance is recommended:

Daily maintenance:

Check the equipment for abnormal sound or vibration.

Check whether the power cord and plug are in good condition, and there is no damage or burning.

Clean the dust and sundries on the surface and inside of the equipment.

Ensure that the vent of the equipment is not blocked.

Weekly maintenance:

Check whether all fasteners of the equipment are loose.

Check whether the heating element and sensor are working properly.

Clean the dust and accumulated materials inside the equipment.

Check and clean the ventilation system.

Monthly maintenance:

Check and lubricate the transmission parts of the equipment.

Check whether the electrical system of the equipment is normal.

Conduct a comprehensive cleaning and maintenance of the equipment.

Annual maintenance:

Conduct a comprehensive inspection of equipment, including mechanical, electrical and control systems.

Make necessary adjustments and repairs to the equipment.

Clean the inside and outside of the equipment to ensure the hygiene and cleanliness of the equipment.

In addition, according to the specific use of the equipment and the recommendation of the manufacturer, it may be necessary to carry out more frequent maintenance or specific maintenance operations. Therefore, it is recommended to refer to the user manual of the equipment or contact the manufacturer for more detailed maintenance instructions.

It should be noted that the above cycle is for reference only, and the actual cycle may be different due to factors such as equipment model, operating conditions and manufacturer's suggestions. Therefore, when making the maintenance plan, these factors should be considered comprehensively and adjusted according to the actual situation.